FEATURES

• Energy-efficient ventilation for rooms in residential houses, apartments, villas, and commercial facilities.
• Reduces heat loss during ventilation by recovering heat.
• Balances humidity and stabilizes air exchange rates, creating a controlled microclimate.
• A network-based system integrating multiple single-room ventilation devices with centralized control.

 THIẾT KẾ 

 TÁI TẠO NHIỆT VÀ ĐỘ ẨM 

• • High-tech ceramic thermal energy accumulator with up to 90% heat recovery efficiency.
  • The accumulator features a large contact surface and high efficiency. It has excellent thermal conductivity and storage properties.

 NGUYÊN LÝ HOẠT ĐỘNG TRONG MÙA LẠNH 

• Phase 1 (70 seconds): Exhaust Air
  • Warm, humid air from the room is extracted, passing through the ceramic thermal accumulator and transferring a portion of its heat and moisture to the accumulator.
  • Once the accumulator heats up, the fan switches to supply mode, beginning a new cycle.

  Phase 2 (70 seconds): Fresh Air Supply

  • Clean, cold air enters the room through the thermal accumulator, absorbing its heat and moisture, warming as it passes.
  • When the accumulator cools, the system automatically switches back to exhaust mode.

  ---

 ĐIỀU KHIỂN 

• The integrated automation system allows operation at the first (low) or second (high) speed:
  • Ventilation mode (air supply or exhaust).
  • Reversible heat recovery mode.

  Device operation modes are controlled via an external control block with a transformer:

  • Included in VENTO A50 PRO / A50-1 Pro / A50 S Pro / A50-1 S Pro packages (model SEA-T12).
  • Available separately for VENTO A50 / A50-1 / A50 S / A50-1 S (models SEA-T12 or SEA).

   

  

• To create a centrally controlled ventilation system for up to 4 devices, connect three VENTO A50 / A50 S / A50-1 S devices to one VENTO A50 Pro / A50-1 Pro / A50 S Pro / A50-1 S Pro equipped with the SEA-T12 controller and power supply. No additional accessories are required.

   

• For systems with more than 4 devices, connect the required number of units with a three-position SEA switch and additional 12W AT-12 or 40W AT-40 transformers, depending on the total power consumption.

 LẮP ĐẶT 

• The device is designed to be installed through a pre-prepared round hole in the exterior wall of the building.
• The best ventilation solution is to install paired devices connected in reverse phase. Some devices supply fresh air to the room, while others extract stale air from the room. This allows for the most effective balanced ventilation system arrangement.
• In the case of completely new construction, the devices are installed in two stages.
• The pre-installation takes place during the indoor finishing stage and the completion of exterior decorative walls. It includes the installation of telescopic air ducts, external ventilation caps, and laying electrical cables.
• The post-installation occurs before operation. It includes installing the heat recovery unit, filters, and connecting the ventilation components.

• If mounting the ventilation cap on the exterior wall is undesirable, it can be installed horizontally, and the external grille can be mounted on the external window shield using the pre-installation KIT BlauPlast 204×60-1. Available as a separate order.

 KÍCH THƯỚC TỔNG THỂ 

 PHỤ KIỆN